Articles

Evolving the MixAlco Process: Analyzing the Frontiers of Biomass Conversion 

New analytical strategies, shifting pretreatment chemistries, and separation breakthroughs are driving the future of biowaste conversion. 
Written byShiama Thiageswaran
InterviewingMark Holtzapple
Water splashes against a yellow background, representing biomass conversion technologies.

iStock

Register for free to listen to this article
Listen with Speechify
0:00
3:00

Transforming diverse, non-sterile biowaste into high-value chemicals and fuels is notoriously complex. The MixAlco process, which relies on mixed-culture fermentation to convert biomass into volatile fatty acids (VFAs) and alcohols, has long been at the forefront of this challenge.

In a recent conversation, process pioneer Mark Holtzapple shared insights into the analytical strategies, shifting pretreatment chemistries, and separation breakthroughs that are pushing biomass conversion technologies closer to commercial scale.

Navigating Complex Fermentation Broths

Because the MixAlco fermentation process relies on mixed cultures, the resulting broth is an incredibly complex chemical matrix. To continuously track individual carboxylate concentrations, the team relies on a dual-method analytical approach utilizing both gas chromatography with flame-ionization detection (GC-FID) and high-performance liquid chromatography (HPLC). GC-FID is employed to measure C2 to C8 volatile fatty acids and C1 to C6 alcohols. As the VFAs are present as carboxylate salts in the broth, phosphoric acid must be added to the samples to convert the salts back into volatile acids for detection.

Working in analytical science?

Register for a FREE Separation Science account to subscribe to the Separation Science Newsletter.

Subscribe for free

In contrast, non-volatile products such as lactic acid and succinic acid are measured using HPLC. Additionally, fundamental chemistry centered on oxidation states provides the definitive benchmark for verification, with succinic acid offering an effective bridge for cross-instrument comparison because it can be evaluated using both analytical techniques.

"Based on their oxidation state, all these products can be expressed as 'equivalent acetic acid,'" explains Holtzapple. "If the reported equivalent acetic acid exceeds the theoretical limit, we reanalyze to determine the source of error."

The Pretreatment Pivot: From Lime to Sodium

Just as analyzing the complex outputs of fermentation requires precision, so too does preparing the complex biomass inputs. Historically, the MixAlco process relied on lime (calcium hydroxide) to enhance biomass digestibility. It was inexpensive, easily regenerated in a lime kiln, and produced calcium carboxylates that could be thermally converted into ketones.

However, ongoing process optimization revealed a critical flaw: calcium was a poor buffer. The team has since pivoted to sodium hydroxide (NaOH), which offers a far superior chemical profile for their current needs:

  • Increased Efficacy: NaOH is a more powerful pretreatment agent, requiring less aggressive treatment conditions than lime.
  • Better Buffering: It is highly compatible with the sodium bicarbonate buffer now used in the system.
  • Regenerable: It can be efficiently recovered using proprietary methods.

The primary historical drawback of sodium—that sodium carboxylates cannot be efficiently thermally converted to ketones—is no longer an issue, as the process has moved away from thermal ketone conversion entirely.

When approaching variable feedstocks such as agricultural residue or municipal waste, the team looks primarily at lignin content to dictate pretreatment severity (time, temperature, and alkali loading). Parameters are screened using sugar release from enzymatic hydrolysis at low enzyme loadings, ensuring the chemical pretreatment is doing the heavy lifting. Promising parameters are then confirmed via mixed-culture fermentation to measure mass loss and acid yield.

Crucially, the team has found that chemical severity can be kept in check. "Our experience is that mixed-culture fermentations are much more powerful than enzymes," Holtzapple notes, "so highly severe pretreatment parameters are not required."

Overcoming Separation and Contaminant Bottlenecks

Separating water-soluble carboxylic acids and salts from dilute broths is a classic bottleneck in bioprocessing. While historically relying on thermal conversion, which led to severe catalyst poisoning from protein-derived sulfur and nitrogen, the team has shifted their approach.

With newer separation methods, the system utilizes carboxylic acids—not carboxylate salts—as the intermediates. "The acids can be cleaned up using distillation, so contaminants are much less of a problem than when we used thermal conversion," Holtzapple explains.

As for the specific recovery techniques now being utilized, the team is keeping their cards close to their chest. A highly promising, proprietary separation method has been proven in the lab with acetic acid and is currently undergoing techno-economic analysis. While Holtzapple's work remains focused on perfecting these methods at the laboratory scale, he points to industry peers, such as Cesar Granda at BioVeritas, who are currently tackling the unique dynamics of separation processes at commercial scale.

The Commercial Frontier

As alternative feedstock technologies transition from the pilot scale to commercial production facilities, the engineering focus shifts from the bioreactor back to the loading dock.

Commercial plants are designed around specific feedstock profiles, but real-world biomass is inherently inconsistent. According to Holtzapple, the single biggest analytical bottleneck the industry must solve today is front-end characterization.

"Because biomass properties vary, each load will be different," says Holtzapple. "When a load is delivered, it would be helpful to rapidly assess the moisture content, degree of lignification, and ash content." Solving this rapid-assay challenge will be critical for maintaining stable, continuous biorefinery operations in the future.

Add Separation Science as a preferred source on Google

Add Separation Science as a preferred Google source to see more of our trusted coverage

Meet the Author(s):

Interviewing

  • Mark Holtzapple

    Dr. Mark Holtzapple is a chemical engineer who graduated with a BS from Cornell (1978) and a PhD from The University of Pennsylvania (1981).  After serving in the U.S. Army as a captain, in 1986, he became a professor of chemical engineering at Texas A&M University.  In 1991, he started working on the carboxylate platform and has received numerous awards for this work including the Presidential Green Chemistry Challenge Award (1996), Walston Chubb Award for Innovation, Sigma Xi (2006), and Odebrecht Award for Sustainable Development (2014).  In partnership with BioVeritas, he continues to innovate on the carboxylate platform so that it becomes a sustainable source of industrial chemicals and fuels.

    View Full Profile

Here are some related topics that may interest you:

Loading Next Article...
Loading Next Article...