News

Restek Debuts RMX-5Sil MS Column for Trace-Level GC-MS Analysis

TriMax deactivation technology enables picogram-level sensitivity and broad compound class inertness for demanding GC-MS/MS methods
Written bySharon Dong
Analytical chemist operating a GC-MS instrument in a modern laboratory, with a chromatogram displayed on an adjacent monitor.

The RMX-5Sil MS column targets GC-MS/MS workflows in environmental, food safety, and forensic laboratories running trace-level regulated methods.

Google Flow (2026)

Register for free to listen to this article
Listen with Speechify
0:00
3:00

Single-digit picogram detection limits are no longer reserved for reference laboratories. Restek Corporation has launched the RMX-5Sil MS, a next-generation gas chromatography column built on proprietary TriMax deactivation technology that delivers broad-spectrum inertness, symmetrical peak shapes, and stable recoveries through challenging real-world samples and aggressive thermal cycling. Available since late January 2026, it targets environmental, food safety, and forensic GC-MS workflows where conventional 5%-phenyl phases reach their limits.

"TriMax deactivation represents truly groundbreaking research," said Danny Shollenberger, Principal Scientist, Restek. "This innovation leverages novel reagents purposely engineered for gas chromatography. By combining optimal reagent chemistry with a precisely controlled process, we dramatically reduce residuals and enable synergistic reactions that form an ordered, dense, three dimensional network of bonding, crosslinking, and deactivation."

What Does Column Surface Activity Cost Trace GC-MS/MS Workflows?

Active sites on a gas chromatography column surface impose a direct analytical cost: polar analytes adsorb onto silanol groups, causing peak tailing, depressed recoveries, and non-linear calibrations that worsen with every injection of complex matrix. Regulatory methods such as EPA Method 8270E for semivolatile organic compounds (SVOCs) enforce system suitability checks for benzidine tailing factors and DDT degradation that probe surface inertness directly. High-throughput environmental labs routinely replace columns as accumulated matrix residues degrade the flow path faster than the stationary phase wears out.

Working in analytical science?

Register for a FREE Separation Science account to subscribe to the Separation Science Newsletter.

Subscribe for free

TriMax addresses surface activity through a three-dimensional deactivation network, combining bonding, crosslinking, and deactivation chemistries using novel reagents purpose-built for gas chromatography. The result is a gas chromatography column surface with far fewer residual active sites and a flow path that performs consistently across all three compound polarity classes.

Four independently verified performance characteristics distinguish this gas chromatography column from conventional 5%-phenyl phases:

  • Sub-Picogram Instrument Detection Limits (IDLs): 98% of semivolatiles achieved single-picogram or better instrument detection limits, with calibration low points of 1—10 ppb for most compounds and ≤20% relative standard error
  • Broad-Spectrum Inertness: Verified for acidic compounds (pentachlorophenol, chlorophenols), basic compounds (benzidine, aniline), and neutrals in the same analytical run
  • Extended Column Lifetime: Compliant performance maintained through aggressive thermal cycling and heavy matrix injection sequences
  • Per-Column QC Testing: Every gas chromatography column in the RMX line ships after individual probe testing for acidic, basic, and neutral inertness

RMX-5Sil MS: Analytical Confidence Across Industries and Matrices

Gas chromatography column variability is a known source of data quality risk in regulated labs, and the RMX-5Sil MS is designed to eliminate it. Its 1,4-bis(dimethylsiloxy)phenylene dimethyl polysiloxane stationary phase matches the selectivity of widely used 5%-phenyl columns, enabling a compatible transition into existing SVOC and pesticide methods with no change to established parameters. The 30 m, 0.25 mm internal diameter, 0.25 µm format (cat.# 17323) fits standard GC-MS/MS instrument configurations.

Environmental laboratories running EPA Method 8270E gain the clearest benefit, where the gas chromatography column's inertness controls adsorption of acidic and basic semivolatiles that are hardest to analyze at trace levels. Testing across 230 pesticides and more than 100 botanical matrices confirmed superior peak shapes and signal-to-noise ratios at both 10 ppb and 50 ppb versus conventional 5%-type columns of the same phase class, an approach consistent with high-throughput botanical screening workflows that demand both sensitivity and matrix robustness. Forensic and clinical toxicology labs also benefit from improved peak symmetry across opioids, benzodiazepines, and antihistamines at sub-microgram loading levels.

Head-to-head application data from Restek shows consistent advantages for the RMX-5Sil MS across the analytical parameters that matter most for trace-level regulated methods:

ParameterRMX-5Sil MS (TriMax Deactivation)Conventional 5%-Type Column
Peak Symmetry (Acids/Bases)Symmetrical across compound classesSusceptible to tailing for active analytes at trace levels
Sub-Picogram IDL Achievement98% of semivolatiles at or below 1 pgVariable; most active compounds exceed 1 pg IDL
Post-Matrix RecoveryStable through extended matrix-heavy sequencesMay deteriorate with accumulated matrix contamination
Compound Class CoverageUnbiased across acids, bases, and neutralsPerformance typically strongest for neutral analytes

Carlos Parra, QC MS Specialist II at NOW Foods, states in Restek's published application data that the RMX-5Sil MS "represents a significant improvement to our routine pesticide analysis, giving our team greater confidence in the data we generate and enhancing the efficiency of our laboratory."

Ramkumar Dhandapani, PhD, Director of Product Management at Restek, points to the field conditions that shaped the design. "GC customers today are navigating significant challenges, including the chlorinated solvent ban, method consolidation pressures, instrument lifetime limitations, and the need to achieve picogram-level sensitivity," he notes. "We listened closely to our customers' concerns and designed solutions to directly address them."

TriMax Deactivation Resets Expectations For Trace GC-MS/MS Column Performance

The RMX-5Sil MS gas chromatography column delivers TriMax's three-dimensional deactivation chemistry within a 5%-phenyl phase geometry that requires no method re-validation, giving labs a practical path to sub-picogram sensitivity without workflow disruption. Sustained inertness across acids, bases, and neutrals means data quality holds through the matrix-intensive sequences that force early replacement of conventional columns. The column is available now for EPA Method 8270E semivolatile and GC-MS/MS multiresidue pesticide programs; for a broader view of regulated GC-MS workflows, explore GC and GC-MS applications across environmental and food industries.

This article is based on a press release issued by Restek Corporation and was produced under Separation Science's AI Editorial Guidelines.

Add Separation Science as a preferred source on Google

Add Separation Science as a preferred Google source to see more of our trusted coverage

Meet the Author(s):

  • black and white photo of Sharon Dong in a button up blouse, smiling
    Sharon Dong, BSc (Hons), MSc joined LabX Media Group (LMG) in 2026 as a Product News & Intelligence Editor. She has a strong background in cellular biology, microbiology, immunology, and molecular genetics. She is an experienced science education and outreach facilitator. Sharon is passionate about communicating science in ways that are clear, engaging, and accessible to a broad audience. In her free time, she enjoys solving jigsaw puzzles and cooking. Sharon can be reached at sdong@labx.com.
    View Full Profile

Here are some related topics that may interest you:

Loading Next Article...
Loading Next Article...